JSW Series
HomeJSW Series
JSW J75E
| SPECIFICATION | J30E-C3 , C5 , D | J50E-C3 , C5 , D | J75E-C3 , C5 , D | J100E-C3 , C5 , D | J150E-C3 , C5 , D | J220E-C3 , C5 , D | J350E-C3 , C5 , D | J450E-C3 , C5 , D | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| K | A | B | K | A | B | K | A | B | K | A | B | K | A | B | K | A | B | K | A | B | K | A | B | ||
| INJECTION UNIT | |||||||||||||||||||||||||
| Screw Diameter | mm | 20 | 22 | 25 | 25 | 28 | 32 | 32 | 35 | 40 | 35 | 40 | 45 | 40 | 46 | 51 | 46 | 53 | 58 | 66 | 72 | 86 | 76 | 84 | 99 |
| Injection Pressure(Max) | kg/ cm2 | 2590 | 2140 | 1656 | 2500 | 1990 | 1520 | 2460 | 2050 | 1570 | 2510 | 1920 | 1520 | 2410 | 1820 | 1480 | 2410 | 1820 | 1520 | 1820 | 1530 | 1070 | 1830 | 1500 | 1070 |
| Injection Capacity(Theoretical) | cm3 | 25 | 30 | 39 | 49 | 62 | 80 | 97 | 115 | 151 | 135 | 176 | 223 | 226 | 300 | 350 | 349 | 463 | 555 | 890 | 1060 | 1510 | 1360 | 1660 | 2300 |
| Injection Capacity(GP-PS) | g | 23 | 28 | 36 | 45 | 56 | 73 | 88 | 105 | 137 | 123 | 160 | 203 | 206 | 273 | 330 | 318 | 421 | 505 | 810 | 965 | 1374 | 1238 | 1511 | 2093 |
| Injection Rate | cm3/sec | 40(33) | 48(40) | 62(52) | 64(53) | 80(67) | 105(87) | 87(72) | 104(87) | 136(113) | 104(87) | 136(113) | 172(143) | 139(116) | 184(153) | 227(189) | 188(157) | 249(207) | 299(249) | 342(285) | 407(339) | 581(484) | 399(332) | 488(407) | 677(564) |
| Plasticizing Capacity | kg/h | 17(14) | 21(18) | 28(24) | 23(19) | 31(26) | 48(40) | 61(50) | 76(63) | 102(85) | 72(60) | 100(83) | 129(108) | 90(75) | 129(107) | 160(133) | 115(95) | 163(136) | 197(164) | 226(188) | 270(225) | 340(283) | 266(221) | 328(273) | 375(312) |
| Screw Speed | rpm | 205(170) | 200(167) | 165(137) | 160(133) | 155(129) | 120(100) | ||||||||||||||||||
| rpm | 500 (417) | 265(220) | 330(275) | 310(258) | 280(233) | 250(208) | 200(167) | 165(137) | |||||||||||||||||
| CLAMPING UNIT | |||||||||||||||||||||||||
| Clamping Force | ton | 30 | 50 | 75 | 100 | 150 | 220 | 350 | 450 | ||||||||||||||||
| Maximum Daylight Opening | mm | 480 | 550 | 650 | 750 | 890 | 1050 | 1370 | 1550 | ||||||||||||||||
| Clamping (Max) | mm | 230 | 250 | 300 | 350 | 440 | 550 | 700 | 800 | ||||||||||||||||
| Mold Thickness | mm | 150-250 | 160-300 | 180-350 | 200-400 | 220-450 | 230-500 | 320-670 | 380-750 | ||||||||||||||||
| Space Between Tie Bars(WxH) | mm | 260 x 260 | 310 x 310 | 360 x 360 | 410 x 410 | 510 x 510 | 580 x 580 | 730 x 730 | 810 x 810 | ||||||||||||||||
| Die Plate Size | mm | 400 x 400 | 460 x 460 | 530 x 530 | 604 x 604 | 740 x 740 | 840 x 840 | 1035 x 1035 | 1175 x 1175 | ||||||||||||||||
| Ejector Force/Stroke | tonxmm | 1.3 x50 | 1.7 x 60 | 3.3 x 80 | 3.3 x 80 | 4.4 x 130 | 4.4 x 130 | 11 x 150 | 11 x 150 | ||||||||||||||||
| Mold Closing/ Opening Speeds | m/min | 39-64(33-53) | 77-61(64-51) | 65-52 (54-43) | 65-47 (54-39) | 52-41(43-34) | 52-43(45-36) | 52-45(43-38) | 52-43(42-36) | ||||||||||||||||
| OTHERS | |||||||||||||||||||||||||
| Pump Driving Motor | kw | 7.5 | 11 | 15 | 18.5 | 22 | 30 | 45 | 55 | ||||||||||||||||
| Heater | kw | 4.5 | 5.68 | 9.02 | 10.1 | 11.9 | 16.2 | 23.7 | 33.2 | ||||||||||||||||
| Mold Height Adusting Motor | kw | 0.4 | 0.4 | 0.4 | 0.4 | 0.75 | 0.75 | 1.5 | 1.5 | ||||||||||||||||
| Total Power Capacity | kw | 12.5 | 17.2 | 24.5 | 29.1 | 34.4 | 46.7 | 69.7 | 89.2 | ||||||||||||||||
| Machine Weight | ton | 1.8 | 3 | 4.4 | 5.1 | 7 | 9 | 17.5 | 22 | ||||||||||||||||
| Machine Dimensioin (LxWxH) | m | 2.99 x 1.14 x 1.67 | C3,D: 3.46×1.16×1.79 | C3,D: 4.19×1.29×1.97 | C3,D: 4.51×1.34×2.0 | C3,D: 5.47×1.54×2.08 | C3,D: 6.20×1.60×2.16 | D: 7.68×1.69×2.35 | D: 8.48×1.82×2.47 | ||||||||||||||||
| C5: 3.46×1.28×1.79 | C5: 4.19×1.51×1.97 | C5: 4.51×1.51×2.0 | C5: 5.47×1.67×2.08 | C5: 6.20×1.72×2.16 | C5: 7.68×1.73×2.35 | C5: 8.48×1.83×2.47 | |||||||||||||||||||
| Hydraulic Oil | l | 90 | 140 | 190 | 230 | 350 | 450 | 650 | 750 | ||||||||||||||||